+++++MSB-A95A
Northstar Polymers, LLC
3444 Dight Avenue So.
Minneapolis, MN 55406
Tel: 612.721.2911
Fax: 612.721.1009
E-Mail:
Northstar Polymers, LLC is a member of Polyurethane Manufacturers Association.
Copy right reserved by Northstar Polymers, LLC 2000 - 2007. Northstar Polymer prohibits duplication of the contents of this web site for the purposes of public display and/or using on another web site without a written authorization by Northstar Polymers, LLC.
MSB-A95A
Data Sheet
This high performance polyester system is one of a family of polymer systems developed by Northstar Polymers for specific demanding work environments. Urethane elastomers molded with this system exhibit high tear strength, high tensile elongation, excellent oil resistance, and outstanding abrasion resistance. They also meet the requirements of 21 CFR 177.1680, FDA direct dry food contact. This combination of features makes elastomers molded from MSB-A95A perfect for applications including the handling of wood chips, grain, sand, gravel and other commodities, mining, and many custom applications. For long-term use in constant aqueous environments, consider a system from our polyether or hybrid product families.
Typical Physical Properties
Physical Property
ASTM #
Typical Value
Durometer Hardness:
D 2240
Shore A 95
Modulus (psi):
100% Elongation:
D 412
1500
300% Elongation:
D 412
3300
Tensile Strength (psi):
D 412
4266
Ultimate Elongation (%):
D 412
400
Tear Resistance (pli)
Die C:
D 624
700.0
Split:
D 624
300.0
Taber Abrasion (mg loss):
D 4060
8.0
Bashore Rebound (%):
D 2632
30
Typical Processing Conditions
Prepolymer:
MSA-042
Curing Agent:
BNA-005
Catalyst Type:
Amine
Catalyst Level:
Included
Prepolymer Temperature (ºF):
180 - 200
Curing Agent Temperature (ºF):
77
Mold Temperature (ºF):
180 -200
Pot Life*(minutes):
3
De-mold Time*** 200 °F (minutes):
15
Complete Cure Cycle*** 180 °F (hours):
16
* Defined as: a 300 gram sample is too thick to pour.
** Defined as: no string of urethane develops when touched.
*** The use of catalyst will increase the rate of cure.
Typical Mixing Ratio
Prepolymer (A) Curing Agent (B)
Code Number: MSA-042 BNA-005
Specific Gravity: 1.190 1.017
Equivalent Weight: 420 45
Stoichiometry: 1.00 0.95
NCO/OH Index: 1.05 1.00
Weight Pph: 90.8 9.2
Weight Ratio: 1.000 0.102
Weight Ratio: 9.825 1.000
Volume Pph: 89.4 10.6
Volume Ratio: 1.000 0.119
Volume Ratio: 8.396 1.000
The actual mixing ratio at the operation may need to be adjusted based on the actual stoichiometric ratio calculation. For machine mixing, the mixing ratio calibration is recommended before the new batch of raw material is used.
Northstar Polymers, LLC
3444 Dight Avenue South
Minneapolis, MN 55406
Tel: 612.721.2911
Fax: 612.721.1009
E-Mail: info@northstarpolymers.com
Notice: All of the statements, recommendations, suggestions, and data concerning the subject material are based on our laboratory results, and although we believe the same to be reliable, we expressly do not represent, warrant, or guarantee the accuracy, completeness, or reliability of same, or the material or the results to be obtained from the use thereof, neither do we warrant that any such use, either alone or in combination with other materials, shall be free of the rightful claim of any third party by way of INFRINGEMENT or the like, and NORTHSTAR POLYMERS DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, OF MERCHANTABILITY and FITNESS FOR A PARTICULAR PURPOSE.