Prepolymers
MPN-023
MPP-023
Northstar Polymers, LLC
3444 Dight Avenue So.
Minneapolis, MN 55406
Tel: 612.721.2911
Fax: 612.721.1009
E-Mail:
Northstar Polymers, LLC is a member of Polyurethane Manufacturers Association.
Copy right reserved by Northstar Polymers, LLC 2000 - 2007. Northstar Polymer prohibits duplication of the contents of this web site for the purposes of public display and/or using on another web site without a written authorization by Northstar Polymers, LLC.
MPN-023
Data Sheet
This polyether prepolymer is designed with the flexibility to work well with a wide variety of curing agents supplied by Northstar Polymers. Users benefit when they reduce inventory and machine changeover costs by using the same prepolymer in a variety of systems. It is commonly used in systems that must cure under ambient or low temperature conditions. Uses include image-transfer patterns and many custom applications.
Typical Physical Properties
Specific Gravity:
1.1731
Viscosity 77 °F (cps):
1200
% NCO:
18.6
Amine Equivalents:
226
Appearance at 77 °F:
Pale Yellow Liquid
Health and Safety Information
We prepare Material Safety Data Sheets and Product Labels that provide health and safety information intended to aid in the safe use of this prepolymer. Before using or handling this product each person must read and become familiar with the available information on its hazards and proper use and handling procedures. For more information, contact your Northstar Polymers representative or call our corporate headquarters in Minneapolis MN.
Storage/Handling Information:
This prepolymer contains isocyanate component, which is very highly sensitive to moisture. If it is left in air, part-A will react with atmospheric moisture and will be ruined. This reaction is non-reversible. Soon after opening a can and dispensing the content, nitrogen gas or negative-40-degree-due-point dry air needs to be injected to the can to blanket the material. Silica gel or calcium chloride desiccant filter should be installed to 55 gallon drum-vent for your drum feeding system. The storage temperature should be at a room temperature between 65 and 80 ºF.
Safety:
This material is an industrial-grade chemical. Please keep it in a secure place and prevent access from any unauthorized individual. The personnel who handles this material needs to read the Material Safety Data Sheet (MSDS) for detail information on safety and handling of the material. The MSDS for each component is sent with the shipment of the material.
When using this material, be sure to operate in a wide-open area with good air movement, or in a well-ventilated area. Wear rubber gloves, long sleeves, and protective eyeglasses to prevent skin/eye contact of the material. When your operation involves heating or spraying of the material, we recommend, in addition to the above, installation of a proper ventilation system and/or using an appropriate type of respirator to prevent inhalation of the fume.
Direct contact of polyurethane raw materials to skin/eye, as well as ingestion may lead to health problems. No eating or smoking should be permitted at the working area. The operator should wash hands well with soap and water after handling the materials and follow the other procedures of the Standard Industrial Hygiene Practices. Please refer to the MSDS for each component for the detailed health information.
For any questions, please contact Northstar Polymers.
orthstar Polymers, LLC
3444 Dight Avenue South
Minneapolis, MN 55406
Tel: 612.721.2911
Fax: 612.721.1009
E-Mail: info@northstarpolymers.com
Notice: All of the statements, recommendations, suggestions, and data concerning the subject material are based on our laboratory results, and although we believe the same to be reliable, we expressly do not represent, warrant, or guarantee the accuracy, completeness, or reliability of same, or the material or the results to be obtained from the use thereof, neither do we warrant that any such use, either alone or in combination with other materials, shall be free of the rightful claim of any third party by way of INFRINGEMENT or the like, and NORTHSTAR POLYMERS DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, OF MERCHANTABILITY and FITNESS FOR A PARTICULAR PURPOSE.