Northstar Polymers, LLC
3444 Dight Avenue So.
Minneapolis, MN 55406
Tel: 612.721.2911
Fax: 612.721.1009
E-Mail:
Northstar Polymers, LLC is a member of Polyurethane Manufacturers Association.
Copy right reserved by Northstar Polymers, LLC 2000 - 2007. Northstar Polymer prohibits duplication of the contents of this web site for the purposes of public display and/or using on another web site without a written authorization by Northstar Polymers, LLC.
What's New?
This new type of polyurethane gel formula creates "super soft" Shore OOO range with unique microcellular gel structure. This formulation can complement the application area the standard polyurethane gel are not appropriate. Possible application includes upholstery, pillows, and seating.
Low viscosity and fast cure pattern for polyurethane-gel-elastomer film casting and other specialty applications.
This bio-base gel is developed for applications that require inexpensive liquid resin filler such as encapsulation of a large electric components or puncture-free tire for low-speed wheels such as of wheel barrows and bicycles. It contains bio-base component by 60%.
This foam formulation is designed to mold flexible foam parts in a smaller quantity by hand-mixing method.
We have studied the formulation principles of viscoelastic polyurethane flexible foams. This experimental formulation is available as a starting point for specific custom formulations for various applications.
Polyester-base polyurethane gel
Low-rebound, higher strength gel for vibration dampening and other specialty applications.
New semi-rigid structural foam
Semi-rigid structural foam with longer pot-life for hand-mix/cast-in-place operations. Alternative to fast-curing rigid foam for short-run molding, filling, and other specialty applications, which requires a long pot-life.
Semi-rigid Light Foam for Molding
Used in compression molding technique to make variety of light parts.
6 LBS/Cuft Semi-rigid Foam for molding parts with high load-bearing
Higher density of structural foam class formulation for load bearing applications.
Room-Temperature-Curable Microcellular Flexible Foam
Easy mixing liquid components to produce flexible microcellular foam parts in compression molds
Northstar Polymers develops room-temperature-curable polyurethane formulations using renewable materials, which are derived agricultural products, designed to serve mold-making applications primarily for concrete mold-making market.
Rhino Hyde® Bio-Spray™ Highly Engineered 100% Solid Coating material Commonly used in Truck-Bed Liner. Using Soybean base Chemical. Renewable domestic material from heart of America!
Northstar Polymers, LLC
3444 Dight Avenue South
Minneapolis, MN 55406
Tel: 612.721.2911
E-Mail: info@northstarpolymers.com