Rhino
Hyde® High-Performance Polyurethane Products,
Services, and Innovations
--Rhinox
Rhino Hyde® is a registered trademark of Tandem Products, Inc..
Tandem Products, Inc.
3444 Dight Avenue South
Minneapolis, MN 55406
Tell: (800)533-0509
Local: (612)721-2911
Fax: (612)721-1009 E
-Mail: info@tandemproducts.com
Send mail to
bwinslow@tandemproducts.com with questions or comments about this web site.
Copyright © 2007 Tandem Products, Inc.
FAST SET K-215 WITH CERAMIC CHIPS
FAST SET K-215 is a two-component, ceramic chip-filled epoxy wear compound specifically designed to RESIST ABRASIVE WEAR in chutes, spouts, hoppers, elbows, cyclones, flop gates, fans, pneumatic systems and other high wear areas. The K-215 wear compounds have been formulated to give the user a shourt cure time so the equipment or substrate being lined or repaired can be put back into service in a shorter period of time compared to the standard wear compaunds available. (The higher the air temperature and the higher the temperature of the surface to which it is being applied, the faster the cure.)
The K-215 wear compound is filled with CERAMIC CHIPS, not beads. The irregular shape of the ceramic chips form a much tighter matrix than the beads, thereby giving a more homogenous epoxy/ceramic wear surface. There is less chance of the epoxy to wear out around the chips versus the beaded type.
Not only recommended for repairs and patching, FAST SET K-215 can be used alone as a lining (in place of ceramic tile). The K-215 trowellable ceramic wear compounds can be easily applied to curved and overhead surfaces (as opposed to using ceramic tiles which may be difficult to cut and piece in the same application).
Maximum service temp. - 200 Tensile strength PSI 3500
degreess F. ASTM D-638
Consistency - Non-sag trowellable Flexural strength PSI 6500
paste ASTM D-790
Work Life* - 30 min. at 77 Compressive strength PSI 11,000
degrees F. ASTM D-495
Mix ratio by volume \ 4 parts Tensile shear strength PSI