Rhino Hyde Belt Wipers provide low friction, long life and excellent cleaning properties. Special characteristics of Rhino Hyde Belt Wipers are:
Lower coefficient of friction than rubber; less wear and drag on the belt.
Better cut and tear resistance than rubber, resulting in longer life and better cleaning properties.
Nonporous, slick surface with much less tendency for sticky materials to cling or build-up on the scraper.
Better chemical resistance than rubber.
Why Rhino Hyde?
Rhino Hyde abrasion resistant products will extend the life of your material handling machinery. Invest in one of our products today. We offer high quality components at economical prices that are supported by our comprehensive and extensive warranties, on-site engineering staff and innovative research and development.
Single Durometer Rhino Hyde Belt Wiper
Available in 85, 93 and 95 Shore A durometers, the standard Rhino Hyde belt wiper is resilient, has excellent cleaning properties and is long lasting.
Available Sizes: Thickness 1/2” up to 2”
Width 4” up to 12”
Length Up to 25’
Dual Durometer Rhino Hyde Belt Wiper
This wiper has been specifically designed for applications that require a harder durometer urethane to wipe away the heavier and larger particles, followed by a softer durometer urethane to squeegee the belt clean and remove excess water.
The dual durometer wiper incorporates two urethanes. A 90 Shore A durometer and a 70 Shore A, which are fused together during the molding process to make a permanent singular thickness.
Available Sizes: Thickness 1/2” up to 2”
Width 4” up to 12”
Tri-Level Rhino Hyde Belt Wiper
Designed to provide a rigid yet uniquely flexible wiper, the soft “sandwiched” center gives this wiper excellent cleaning properties without excessive wear to the belt. The center is a 70 Shore A durometer urethane, and the two outer layers are comprised of 90 Shore A. All three layers are fused together during the molding process to make a singular, permanent thickness.
Available Sizes: Thickness 3/4” up to 2”
Width 4” up to 12”
Length Up to 10’
Ceramic Beaded Rhino Hyde Belt Wiper
This is the most rigid and durable belt wiper available. The ceramic beads molded into the Rhino Hyde urethane will easily clean the toughest applications – even frozen materials. In fact, the Rhino Hyde ceramic beaded belt wiper is designed for below freezing conditions.
