Rhino Hyde®  High-Performance Polyurethane Products, Services, and Innovations

       Home      Products     Company Profile    Contact Info

 

 

 

 

Home

-Products

--Mining Products

---Ceramic Tiles

 

 

 

 

 

Rhino Hyde® is a registered trademark of Tandem Products, Inc..

 

 

Tandem Products, Inc.

3444 Dight Avenue South

Minneapolis, MN 55406

Tell: (800)533-0509

Local: (612)721-2911

Fax: (612)721-1009 E

-Mail: info@tandemproducts.com

 

Send mail to bwinslow@tandemproducts.com with questions or comments about this web site.
Copyright © 2007 Tandem Products, Inc.

 

High Alumina Contained Ceramic Tiles and Ceramic Hex Tiles

Tandem's ceramic tile is made from high-alumina, extremely dense material.  Its high purity alumina crystals are bonded together with a crystalline aluminum silicate that insures the integrity of the ceramic shape after firing.  Harder than tool steel and close to diamonds in hardness, it possesses extraordinary durability, as indicated on the accompanying Moh Scale of Hardness. 

Moh Hardness  
Diamond 10
Aluminum Oxide 9
Tool Steel 6.5
Silica 6
Glass 5.5
Carbon Steel 5.5
Copper 3

Superior Properties for Superior Abrasion Resistance

The following chart lists the properties that account for the superior abrasion resistance and economy of ceramic tile linings.

Typical Properties Unit Value
Hardness, Moh Scale   9
Specific Gravity   3.4
Water Absorption   0 %
Density  lbs/inch 0.1227
  gram/cc 3.40
Compressive Strength psi 180,000 
  MPa 1,240 
Tensile Strength psi 20,000 
  MPa 135
Flexural Strength psi 20,000
  Mpa 270
Coefficient of Thermal Expansion x 0.000001/ ºF 3.6
  x 0.000001/ ºC 6.5
Thermal Conductivity BTU/hr/ft2/ºF/in 101
  cal/sec/cm2/cm/ºC at 25 ºC 0.035
Impact Resistance, Charpy in-lb 6.5
  Dyne-cm 7.3

Hex Tile

Hex tile is used for lining both concave and convex curved sections where other types of tile will not readily fit.  This unique, flexible, pre-mad mounted tile permits easy, rapid, low-cost, do-it-yourself surfacing of curved sections.